Contact Dwyer Sales Department: 1-201-419-6120  |

'); newWindow.document.write('
'); newWindow.document.write('Click screen to close'); newWindow.document.write('
'); newWindow.document.close(); newWindow.focus(); } } //-->

Series FS Flowmeter with Flow Limit Switch

Latching Relay, Adjustable, Dual Scale, Mount in any Position

Direct-Reading Series FS Flowmeters offer visual flow rate indication and an adjustable flow alarm to close AC electrical circuits, trigger warning lights, or activate other process control equipment. Spring-retained moveable piston design allows installation in any position.  Dimensional Information

Monitoring flow in chemical processing, waste water processing, process control, lubrication systems, solar systems, drain lines and pump testing.

Service: Compatible liquids.
Wetted Materials: Polysulfone body, Barium Ferrite, Stainless Steel spring and retaining rings.
Temperature Limits: 158°F (70°C).
Pressure Limits: 220 psi (15.1 bar).
Accuracy: ±7% full scale.
Repeatability: 1.0%.
Set Point: Adjustable 0 to 100% FS.
Supply Voltage: 115 VAC, 140 VAC max.
On-State Current: 0.02 to 1.0 A AC.
Connections: 1" male NPT Polysulfone or 3/4" male NPT Brass.
Flow Scale: Calibrated at 1.0 specific gravity @ 70°F (21°C).
Agency Approvals: CE.
Popular Models:
Model Number Range, GPM Connections
.05 - 4.0
1.0 - 16
4.0 - 28
.05 - 4.0
1.0 - 7.0
1" NPTM (polysulfone)
1" NPTM (polysulfone)
1" NPTM (polysulfone)
¾" NPTM (brass)
¾" NPTM (brass)
Previous Page