Contact Dwyer Sales Department: 1-201-419-6120  |  dwyer@nciweb.com


Dwyer Series TF Turbine Flow Sensor

0 to 5 VDC Output, Liquid or Gas Models
 

Series TF Turbine Flow Sensors are suitable for a wide variety of industrial, commercial and laboratory flow applications. Sensors use a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC signal for recording and datalogging. Models for use with liquids also provide a pulsed output for flow totalizing - see model TM2.

Specifications
Service: Clean gases or clean low viscosity liquids (≤10 centistokes) depending on model.
Wetted Materials: 40% glass filled PPS (polyphenylene sulfide) sensor and fittings, sapphire bearing, Viton® O-ring.
Accuracy: ±3% full scale.
Linearity: ±3% full scale.
Repeatability: ±0.2% full scale (liquid models), ±1% full scale (gas models).
Temperature Limits: 122°F (50°C). Temperature Sensitivity: ±0.2% per °C.
Pressure Limits: 100 psi (6.89 bar) at 20°C (liquid models); 40 psi at 20°C (gas models). Pressure Sensitivity: ±0.07% per mm Hg (for air at 1 to 3 atm).
Supply Voltage: 12.5 ±2 VDC, 30 mA (connecting cable or cable/adapter sold separately).
Output: 0 to 5 VDC (gas models), 0 to 5 VDC and 7.5 VDC peak pulse output, 0 to 400 pps typical (liquid models).
Weight: 1 lb (0.5 kg).
Agency Approvals: CE.
Features
No. TF01 - 120 VAC, 60 Hz power supply/adapter for liquid flowmeters
No. TF02 - 240 VAC, 50 Hz power supply/adapter for liquid flowmeters
No. TF03 - 120 VAC, 60 Hz power supply/adapter for gas flowmeters
No. TF04 - 240 VAC, 50 Hz power supply/adapter for gas flowmeters
No. TF05 - Optional connecting cable for liquid flowmeters
No. TF06 - Optional connecting cable for gas flowmeters
Ordering Information
Model Number Range Connection
 TF1032 0.1-2.0 l/min 1/4
 TF1053 1-10 l/min 3/8
 TF1062 1-10 GPH 3/8
 TF1072 4-100 GPH 3/8
Previous Page