HICORP 6-Way Split Transfer Valve — Dual Stream Switching — Northeast Controls Inc.
Northeast Controls Inc.

HICORP Transfer Valves

6-Way Configuration

6-Way Split Transfer Valve

Dual Stream · Simultaneous Switching · API 614 Compliant

Two Streams, One Valve, One Operation

Dual Independent Flow Paths — Synchronized Changeover

The 6-Way Split configuration uses opposite-side porting with independent top and bottom flow paths. It functions as two 3-way valves in a single body — both streams are switched simultaneously with a single operator action, ensuring synchronized changeover without the risk of misaligned valve positions.

This configuration is used in dual-stream lube oil systems, applications with two independent circuits sharing a common duplex filter arrangement, and any process where two streams must always be directed to the same equipment train at the same time.

Sizes: 1½″ through 6″
Connections: ANSI 150# · 300# · Butt-Weld
Body: Carbon Steel · 304L / 316L SS
Max Pressure: 675 PSI (300# / BW)
Seals: Buna-N · Viton® · Neoprene
Compliance: API 614
HICORP 6-way split porting transfer valve — dual-stream flanged valve in industrial facility

6-Way Split Porting

Standard Features

  • ›Dual independent flow paths in a single valve body
  • ›Opposite-side porting — both streams switch simultaneously
  • ›Positive mechanical shoe-seal — zero leakage in both positions
  • ›Continuous flow changeover — no shutdown or pressure loss
  • ›Stainless steel operating shaft and internal mechanism
  • ›API 614 designed and tested
  • ›Flanged (150# / 300#) or butt-weld connections
  • ›Internals interchangeable with HYCOA JR-33
HICORP 6-Way Split Transfer Valve dimensional drawing — top and bottom split valves, inlet port #1, outlet port #6, ports #2–#5, equalizing bypass valve, labeled dimensions A–E

Approximate Dimensions

All dimensions in inches. Consult factory for certified drawings.

Valve SizeABCDEWeight
1½″1051314-13/169-1/16100 lb
2″1271514-13/169-1/16128 lb
3″ (150#)1471716-1/210-3/4208 lb
4″218-3/81919-1/213-3/8330 lb
6″269-7/81721-5/1615-1/16600 lb

Contact factory for certified configuration-specific drawings.

Pressure & Temperature Ratings

Pressure Ratings
150# ANSI Flange260 PSI — CS @ 200°F
300# ANSI Flange675 PSI — CS @ 200°F
Butt Weld675 PSI — CS @ 200°F
Temperature Ratings
Viton®350°F max
Neoprene250°F max
Buna-N200°F max

Operating Instructions

1

Open equalizing/fill line valve and allow pressure to balance on both streams.

2

Turn "T" handle counterclockwise ≈6–7 turns.

3

Push ball handle down to unseat shoes on both flow paths.

4

Rotate ball handle 180° (red arrow points to active ports).

5

Release ball handle and hand-tighten "T" handle clockwise (20 in-lb max).

6

Close equalizing valve.

Ready to specify the 6-Way Split Valve?

Contact Northeast Controls for sizing assistance, certified drawings, or a quotation. Share your piping sketch and our engineers will confirm the correct selection.

Request PricingCall