WE NO LONGER OFFER THIS PRODUCT. PLEASE CONTACT MFG DIRECTLY.

'); newWindow.document.write('

'); newWindow.document.write(' Click screen to close

'); newWindow.document.write('

'); newWindow.document.close(); newWindow.focus(); } } function MM_openBrWindow(theURL,winName,features) { //v2.0 window.open(theURL,winName,features); } //-->

McCrometer V-Cone Flowmeter

Features:

High accuracy

High repeatability

Conditions flow before measuring

Minimum straight pipe requirements

Broad rangeability

Low headloss

Clean or dirty liquids, wet gases, slurries

Low signal noise

Self cleaning

Also See The V-Cone's Specific Product Feature Page

McCrometer's innovative V-Cone flowmeter is a patented technology designed for high performance in harshenvironments and restrictive spaces. This groundbreaking flowmeter measures the widest range of fluids, including wet gas, condensate, and dirty or abrasive flows, under the most challenging conditions.

The key to its enhanced performance lies in the shape and position of the cone in combination with the locations of the measurement ports. This allows the V-Cone to act as its own flow conditioner and mixer, fully conditioning and mixing the flow prior to measurement.

This advanced differential pressure-type (DP) flowmeter provides outstanding performance without the straight pipe runs of other flowmeters. It has an accuracy of up to +/-0.5% of reading, +/-0.1% repeatability, and flow range of 10:1 or greater, along with installation flexibility and low to no maintenance. It's ideal for retrofits and limited-space applications.

The V-Cone can be sized for line diameters of 1/2-inch to over 120-inches. It also comes in two standard configurations: a precision flow tube or insertion weld-on saddle meter. A variety of construction materials is also available. Additionally, the V-Cone has high pressure, temperature, and corrosion resistant capability and is excellent for multi-phase flows.

V-Cone Flowmeter Specifications

Accuracy: up to �0.5% of rate

Repeatability: �0.1%

Turndown: 10:1

Standard betas: 0.45 through 0.85

Headloss: Percentage of differential pressure produced varies with beta ratio

Installation: Typically 1-3 diameters upstream and 3-5 diameters downstream

Electronic Instrumentation for V-Cone

Differential Pressure Transmitters

Flow Computers for remote display of flow data and system control

Chart Recorders for graphical recording of flow data

Pressure and Temperature Transducers for mass flow measurement