CALL: 1-201-327-7660


Magnesonics Model MSC 900 Non-Contact Level Measurement

The MSC900 series of wall and panel mounting control units provide comprehensive control functionality for any 4-20 mA or HART compatible transmitter. A back-lit display gives clear visual indication of the measured value and status of all inputs and outputs.

Mounted in a non-hazardous area, the main powered MSC900 provides a protected 24V do power supply to the transmitter, which may be installed in a hazardous area.

The input signal from the transmitter may be offset, damped, scaled and linearised as required. A range of pre-programmed linearisation algorithms are user selectable.

The 4-20 mA output signal may also be scaled to re-transmit all or just part of the input signal or calculated value.

5 relays are provided and are fully field programmable to perform a wide variety of control, fault indication or alarm duties.

  • IS Supply to transmitter
  • 4-20 mA / HART input
  • Isolated 4-20 mA output
  • 5 Control relays
  • Multi-function back lit display
  • Fall or panel mount
  • Preprogrammed Linearisation - Contents and Open Channel Flow
  • Tough polycarbonate weatherproof wall mount enclosure for internal or external mounting.
  • Accepts any 4-20nA or HART compatible input, allowing standardization of control room layout.
  • Control units are 240/115V ac powered and provide an intrinsically Safe 24V de power supply to the transmitter.
  • Supports two voltage free contact closure inputs, allowing override of control functions on external triggers.
  • Clear visual display of measured value with units and relay status. Also used to guide user through programming menu.
  • 4-20mA 12 bit isolated current output proportional to measured value.
  • 5 voltage free SPDT relays for alarm and control duties.
Previous Page