Simpliport
|
| SIMPLIPORT OFFERS
OUTSTANDING READABILITY AND ACCURACY PLUS LOW MAINTENANCE DESIGN
FEATURES |
| BI-COLOR DIRECT
READING 0 TO 3000 PSI |
- For 0 To 3000 PSI Steam Pressures In Six Standard Lengths.
- Models For Indoor, Weatherproof Or Explosion- Proof Installations.
- Stainless Steel Hoods Allow Increased Installation Versatility.
|
| |
|
 Designed
and manufactured according to rigid quality standards, the
Clark-Reliance Simpliport can
be depended on for accurate and easy water level reading throughout
an extended service life. World wide, Simpliport has
delivered outstanding performance in dependability, low maintenance
and installation versatility.
To meet specific requirements,
Simpliport is
offered in six standard visibility lengths from 10¼" to
22-1/8". Special gages of longer visibility can be supplied. In
all lengths, gage ports are tightly spaced
for maximum reading accuracy. All standard illuminator
ports are brilliantly illuminated by individual 50-watt tungsten-halogen
lamps.
Low
Maintenance Simpliport 's
low maintenance factor is demonstrated by the ease
of replacing individual gage glasses. Nuts
are retightened with a torque wrench, free of any
possibility of harming Glass Disc Module components.
Stainless steel body and hoods, plus other quality
materials throughout, also add to low maintenance
and product durability.
|
| Simple To
Read |
|
 Operating on reliable principles of
light refraction, the Clark-Reliance Simpliport is
a fundamentally accurate bi-color gage. Light
does not refract through water on the same line that light
refracts through steam. Therefore, by calculated placement
of a light source, colored glass filters and gage glass,
the Simpliport indicates water
levels by displaying green ports
at water level and red ports
for steam above. When the level is partially within
one port's area, the port will divide its color horizontally
to indicate the exact water level. Simpliport Gages
Have Been Installed Worldwide Since 1962 ! Larger Image of Simpliport Gage
- Steam Shows RED
- Water Shows GREEN
|
|
Gage Bodies Withstand Continuous Service To
3000 PSI Steam Pressure
|
|
 Quality
construction is a Simpliport mainstay. Gage bodies are
manufactured from Type 304 Stainless steel. In addition,
high quality materials throughout all gage components impart
product integrity to even its smallest parts. The result
is a premium gage, extremely, strong yet lightweight. For
example, the six-port Model P3006 with 12-5/8" visibility
weighs only 16lbs.
Other
design features include the "all around" spring support
for Glass Disc Modules. This provides positive and uniform
loading to prolong the life of gage glass and mica shields.
For
efficient, trouble free maintenance, Simpliport gages
are furnished with two spare Glass Disc Modules, a 1-7/8" socket,
a 3/4" - 1/2 " drive adaptor, high temperature thread
lube, and module extractor pliers. Larger
Image Of Gage Body
|
| |
| Simpliport® Illuminator Economizes Drum Level Indication |
|
 Introducing
the new Simpliport® LED Illuminator for bi-color boiler
drum level indication. The highly visible light improves plant
safety and reliability by eliminating the heat, burning hazards
and maintenance associated with traditional illuminators.
The new Simpliport® LED Illuminator is a cost-effective
choice because it utilizes innovative LED lights that use less
than 10% of the power used by standard light bulbs. Designed
and manufactured according to rigid quality standards, Simpliport® LED
Illuminators retrofit any existing Simpliport® bi-color
gage glass.
With a service life that lasts approximately ten years, the
new Simpliport® LED Illuminators are maintenance-free and
deliver long-term dependability and high quality performance
for all your Reliance bi-color direct-reading boiler
gages.
|
| |
| Outdoor Illuminators |
| Designed for outdoor applications,
weatherproof models are also suitable for NEC-DIV.2 areas, when
equipped with 50-watt reflector spot lamps. Extra high-intensity
models are available for outdoor use where ductwork cannot be
installed. |
| |
| Illuminator Timer |
| Model TPS-120 Illuminator
Timer allows illuminator lamps to light only when gage water
levels are being observed. Maintenance costs are reduced
significantly due to far fewer lamp changes. Added savings
occur in lower electricity consumption and fewer lamp purchases. The
timer can be set to light lamps for periods between 2 seconds
and 3 minutes. |
| |
| Explosion Proof
Illuminator |
|
For NEC-Div. 1 hazardous
atmosphere applications (requiring NEMA 7 type fixtures) special
explosion proof illuminators can be furnished. In explosion
proof models, illuminators employ 150-watt flood lamps which
direct light forward.
Care should be taken to assure the proper installation of
the illuminator and gage. When installing, specific
instructions provided should be carefully followed. Illuminators
are C.S.A. approved and available in both 120V and 240V models,
AC or DC.
|
| |
| Fiberlevel - Bi-Color, Direct & Remote Reading |
 The Clark-Reliance FiberLevel level gage system operates as a dual bi-color gage viewing system which uses two separate indicating techniques. At the boiler, direct (right angle) readings are indicated by a Clark-Reliance Simpliport® gage. A fiber optic cable then transmits the Simpliport indication to a remote location. There the reading is displayed on a wall- or panelmounted fiber optic viewer. At both locations, steam is indicated by red color and water is indicated by green color. More Details |
| Glass Module and Packing Nut
Assembly |
|
|
| |
 * Unauthorized
Replacement Modules have been unknowingly
purchased by Clark Reliance customers. These modules
have lead to severe in-service failures of the product. Clark
Reliance has investigated these failures and discovered
at least one industrial distributor selling "look
alike" modules that were manufactured off shore. Legal
action has been taken against this distributor. Please
make sure your replacement parts are genuine Clark Reliance
Replacement Parts. Larger Image of Box |
|
|
