The Dwyer Series 4000 Capsuhelic® differential
pressure gage is ideally suited for use as a read-out device
with the DS-300 Flow Sensors. The gage may be used on system
pressures of up to 500 PSIG even when the flow sensor differential
pressure to be read is less than 0.5" w.c. With accuracy of ±3%
of full scale, the Capsuhelic® gage can be used in ambient
temperatures from 32 to 200°F (0 to 93.3°C). Zero and
range adjustments are made from outside the gage. The standard
gage with a die cast aluminum housing can be used with the flow
sensor for air or oil applications. For water flow measurements,
the optional forged brass housing should be specified. The Capsuhelic® gage
may be panel or surface mounted and permanently plumbed to the
flow sensor if desired. The optional A-610 pipe mounting bracket
allows the gage to be easily attached to any 1-1/4" - 2" horizontal
or vertical pipe.
For portable operation, the A-471 Capsuhelic® Portable
Gage Kit is available complete with tough polypropylene carrying
case, mounting bracket, 3-way manifold valve, two 10' high pressure
hoses, and all necessary fittings.
|