Contact Dwyer Sales Department: 1-201-419-6120  |  dwyer@nciweb.com


FLOTECT® V10 Mini-Size Flow Switch

Proof of Flow or No Flow in 1/2 to 2" Pipe, Low Cost, Leak Proof Body, Weatherproof
 

V10 Flow SwitchDesigned to provide an inexpensive, reliable unit to monitor the presence or absence of flow in a system. The V10 flow switch is used to monitor unattended equipment and protect it from costly damage. The V10 flow switch utilizes a rugged, hermetically sealed reed switch which is encapsulated in a polypropylene switch housing that fits into a standard heavy duty leak proof brass body or optional 303 Stainless Steel body. The patented switch adjustment allows the user to change the switch to Normally Open (NO) or Normally Closed (NC) in the field merely by loosening two screws. The switch housing is located outside the process media, making switch change-over or maintenance easy without interruption of process flow.

A full size, trimmable stainless steel vane is provided with a removable laminated template. This template is calibrated for brass or ductile iron reducing tees and forged steel straight tee/bushing combinations. Allows for field installation in pipelines from 1/2" to 2" diameter. A table with approximate actuation and deactivation values is provided on the "Specifications" page.

FEATURES

Weatherproof Design
Integral, Rugged Electrical Wiring
Snap on Electrical Housing Allowing Service without Process Shutdown
Leak Proof Body of Brass or 303 SS
Trimmable Vane for 1/2" to 2" Pipe Sizes
Standard cable length is 6 feet. Extra length is available, contact factory.

SPECIFICATIONS
  • Service: Compatible gases or liquids.
  • Wetted Material:
    Vane: 301 SS.
    Body: Brass or 303 SS.
    Pin and Spring: 301 SS, 302 SS, and 316 SS.
    Magnet: Ceramic 8.
  • Temperature Limit: V10: 200°F (93°C);
  • Pressure Limit: Brass body: 1000 psig (69 bar), 303 SS body: 2000 psig (138 bar).
  • Switch Type: SPST hermetically sealed reed switch. Field adjustable for normally open or normally closed.
  • Electrical Rating: 1.5A @ 24 VDC resistive, 0.001A @ 200 VDC resistive, 0.5A @ 125 VAC.
  • Electrical Connections: V10: 22 AWG, 18" (460 mm) long; V11: 22 AWG, 6' (1.83 m) long. Rated 392°F (200°C). 300V. Flame retardant extruded FEP insulation and overall shield.
  • Conduit Connection: V10: 1/8" male NPT.
  • Process Connection: 1/2" male NPT standard. Contact factory for other options.
  • Mounting Orientation: Switch can be installed in any position but the actuation/deactuation flow rates are based on horizontal pipe runs and are nominal values.
  • Set Point Adjustment: Vane is trimmable.
  • Weight: V10: 4.5 oz (0.13 kg); V11: 5.8 oz (0.165 kg).
  • Agency Approvals: V10: CE, UL and CSA; V11: UL.
  • Switch Enclosure: V10: Polypropylene; V11: Polybutylene terephthalate (PBT).
 
APPLICATIONS
Applications are chemical processing, irrigation systems, air conditioning, refrigeration, heating systems, cooling lines, machinery, liquid transfer systems, water treatment, food processing, and machine tools. Also, other applications compatible with the materials of construction.
 
Flow Rates
Cold Water Flow Rates
Approximate actuation/deactuation
GPM upper, LPM lower
Air Flow Rates
Approximate actuation/deactuation
SCFM upper, LPM lower
Pipe Trim N.O. N.C. Pipe Trim N.O. N.C.
1/2" L 2.6/2.3
9.8/8.7
2.6/2.5
9.8/9.5
1/2" L 10.3/8.8
291.7/250
10.2/9.2
288/260
3/4" J 3.1/2.7
11.7/10.2
3.1/2.8
11.7/10.6
3/4" J 13/11.6
368.3/328
12.9/11.6
365/328
1" H 4.8/4.5
18.2/17
4.8/4.4
18.2/16.7
1" H 19.2/17.6
543.3/498
18.9/17.6
535/498
1-1/4" E 6.2/5.6
23.5/21.2
6.1/5.6
23.1/21.2
1-1/4" E 24.8/22.2
701.7/628
24.5/22.5
693/637
1-1/2" C 8.2/7.7
31/29.1
8.2/7.7
31/29.1
1-1/2" C 33.4/31.2
946.7/883
33/30.6
935/867
2" Full 9.5/9.1
36/34.4
9.5/9
36/34.1
2" Full 50.2/48.4
1422/1370
50.2/47.7
1422/1352
 
Popular V10 Models
Model Number Body
 V10  Brass lower body
 V10SS  303 stainless steel lower body
 
 
Previous Page