Series DH3 Digihelic |
||||||||||||||||||||||||||||||
| Digihelic® Differential Pressure Controller | ||||||||||||||||||||||||||||||
| Digihelic® Controller in Photohelic® Gage, Square Root Output for Flow | ||||||||||||||||||||||||||||||
 The Series DH3 Digihelic® Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output all packed in the popular Photohelic® gage style housing. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for pressure, velocity and flow applications, achieving a 1% full scale accuracy on ranges down to the extremely low 0.25" w.c. to 2.5" w.c. full scale. Ranges of 5" w.c. and greater maintain 0.5% F.S. accuracy. Bi-directional ranges are also available.
The Series DH3 Digihelic® controller allows the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. 2 SPDT control relays with adjustable deadbands are provided along with a scalable 4-20 mA process output. Programming is easy using the menu key to access 5 simplified menus which provide access to: security level; selection of pressure, velocity or flow operation; selection of engineering units; K-factor for use with flow sensors; rectangular or circular duct for inputting area in flow applications; set point control or set point and alarm operation; alarm operation as a high, low or high/low alarm; automatic or manual alarm reset; alarm delay; view peak and valley process reading; digital damping for smoothing erratic process applications; scaling the 4-20 mA process output to fit your applications range and field calibration. |
||||||||||||||||||||||||||||||
| PRODUCT SPECIFICATIONS | ||||||||||||||||||||||||||||||
| Service: Air and non-combustible, compatible gases. Wetted Materials: Consult factory. Housing Material: Die cast aluminum case and bezel. Accuracy: < 5" w.c. (except ±2.5" w.c.): ±1%; All other ranges: ±0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up). Stability: < ±1% per year. Pressure Limits: Ranges ≤ 2.5" w.c.: 25 psi; ±2.5", 5" w.c.: 5 psi; 10" w.c.: 5 psi; 25" w.c.: 5 psi; 50" w.c.: 5 psi; 100" w.c.: 9 psi. Temperature Limits: 32 to 140°F (0 to 60°C). Compensated Temperature Limits: 32 to 140°F (0 to 60°C). Thermal Effects: 0.020%/°F (0.036/°C) from 77°F (25°C). Power Requirements: 12-28 VDC, 12-28 VAC 50-400 Hz. Power Consumption: 3 VA max. Output Signal: 4-20 mA DC into 900 ohms max. Zero & Span Adjustments: Accessible via menus. Response Time: 250 ms (damping set to 1). Display: Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status. Electrical Connections: 15 pin male high density D-Sub connection. 18" (46 cm) cable with 10 conductors included. Process Connections: 1/8" female NPT. Side or back connections. Mounting Orientation: Mount unit in vertical plane. Size: 5" (127 mm) O.D. x 3-1/8" (79.38 mm). Weight: 1.75 lb (794 g). Agency Approvals: CE. |
||||||||||||||||||||||||||||||
| SWITCH SPECIFICATIONS | ||||||||||||||||||||||||||||||
| Switch Type: 2 SPDT relays. Electrical Rating: 1 amp @ 30 VAC/VDC. Set Point Adjustment: Adjustable via keypad on face. |
||||||||||||||||||||||||||||||
| ACCESSORIES | ||||||||||||||||||||||||||||||
| A-298 - Flat aluminum bracket for flush mounting Capsuhelic® gage, 603A, 605, and 3000MR. A-370 - Mounting bracket, flush mount Capsuhelic® gage or Series 631B Transmitter in bracket. Bracket is then surface mounted. Steel with gray hammertone epoxy finish. A-465 - Flush mount space pressure sensor. A-301 - Static pressure tip, for 1/4" metal tubing connection. A-302 - Static pressure tip, for 3/16" and 1/8" ID plastic or rubber tubing. A-303 - Portable static pressure tip, for 3/16" ID rubber or plastic tubing with 4" insertion. A-414 - 316 SS clean room pressure sensor. A-307 - Static pressure fitting, for 1/4" metal tubing connection. A-308 - Static pressure fitting, for 3/16" and 1/8" ID plastic or rubber tubing. A-417 - Static pressure pickup, for use in clean rooms, 100 micron filter picks up static pressure, stainless steel wall plate fits 2" x 4" electrical box, sealed with foam gasket, screws included. Barbed brass fitting holds 1/8" to 5/32" ID tubing. A-418 - Static pressure pickup, room mount with Delta style plastic enclosure fits 2" x 4" electrical box, mesh screen hides static pressure pickup port, clean connection to 1/8" to 5/32" ID tubing and pressure sensor. Sealed with foam gasket, screws included. A-419 - Static pressure pickup ceiling mount, plate rests on top of standard 3/4" thick ceiling tile while 100 micron filter faces down through 5/8" hole in tile, screws included for optional mounting to junction box, barbed fitting holds 1/8" to 5/32" ID tubing. A-420 - Static pressure pickup for roof/outside mount, NEMA 4X (IP66) rated structure withstands harsh environmental elements, structure is 3-5/8" across and 2-1/2" deep, EMT conduit fitting is 1/2", pressure connection is brass barbed fitting for 1/4" tubing. A-306-A - Outdoor static pressure sensor, provides average outdoor pressure signal for reference in building pressurization applications, includes sensor, 50 ft vinyl tubing, mounting bracket and hardware. A-201 - Rubber tubing, 3/16" ID, 9 ft length. A-202 - Rubber tubing, 3/16" ID, lengths to 50 ft, per ft. A-203 - PVC tubing, 1/8" ID x 1/4" OD, per ft. A-210 - Aluminum tubing, 1/4" OD, 5 ft length, 500 psi maximum pressure @ 200°F. A-211 - Aluminum tubing, 1/4" OD, 50 ft length, 500 psi maximum pressure @ 200°F. A-220 - Flexible vinyl tubing, clear 3/16" ID x 5/16" OD, lengths to 500 ft, per ft, 45 psi maximum pressure @ 73°F. A-221 - Flexible vinyl tubing, clear 1/8" ID x 3/16" OD, lengths to 500 ft, per ft, 40 psi maximum pressure @ 165°F. A-222 - Flexible vinyl tubing, clear .240" ID x .375" OD, lengths to 500 ft, per ft, 35 psi maximum pressure @ 73°F. A-223 - Black polyethylene 1/8" ID 1/4" OD, 10 ft length, 200 psi maximum @ 140°F. |
||||||||||||||||||||||||||||||
| AVAILABLE MODELS | ||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| Previous Page |
