Dwyer Series MM Mini Master Flowmeter
|
Offering advanced features at low cost, the Dwyer Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc.
The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the Mini-Master® A flowmeter with a low profile or flat front surface where no valve is required.
The Mini Master® A is practically unbreakable, mounts easily, and is easy to read. Two 5/16" O.D. mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided.
Despite its compactness, the Mini-Master® A flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy.
Where a compact flowmeter is required to measure small volume air flows, the Model MMF is recommended. Easy to mount, they require a minimum of panel space. A white back on the flow tube makes the ball float easy to see. The scale is highly visible and easy to read. Scale graduations are printed on aluminum alongside the flow tube (not on it), so the position of ball float is instantly visible.
The Model MMF's bezel type mounting is modern, attractive and quickly installed from the font of instrument panel. Two ¼" O.D. mounting-connection tubes are integrally molded with flowmeter body. They can be back connected to flexible rubber or plastic tubing and held in place with two spring retainers which are furnished. If preferred, connections may be made to metal or rigid plastic tubing with a double compression fitting or nylon tube union such as Dwyer Part No. A-328.
Excellent repeatability and ±10% accuracy make the Mini-Master® F flowmeter an excellent value at its low cost.
|
|
|
|
- Standard Model MMA bottom metering valve.
- Standard Model MMA without Valve.
- Standard Model MMA, top front mounted metering valve.
- OEM Model MMA. Welded caps on unused valve bosses.
- Modell MMF-50-V with 1-1/2" scale with metering valve-knob.
- Model MMF-10 with 1-1/2" scale and no valve.
- Model MMF-10-TMV with top mounted valve for vacuum service. Use screwdriver to make adjustment.
|
|
Model MMF mounts easily from front of panel. Drill two 9/32" or 5/16" diameter holes in panel on 2 1/16" centers. Insert mounting connector spuds. From rear, slide on the two spring retainers (furnished) and push on rubber or plastic tubing.
|
Model MMF connections. Connector at top, installed in panel, has retainer and flexible tubing in place. Connector at bottom shows alternative connection with metal or rigid plastic tubing, using a double compression nylon tube union (as Dwyer Part No. A-328).
|
|
|
MODEL MMA |
Molded entirely from nylon 12. Measure and control air/gas flow from .1-200 SCFH, water/liquid flow from 1 to 60 GPH. |
SPECIFICATIONS |
Meter Body, Bezel, Tube, Valve and Knob
|
Nylon 12
|
Floats |
Black glass, K Monel, stainless steel, tungsten carbide |
Connections |
Molded with body. 5/16" O.D. for push-on rubber or plastic tubing with spring tubing clamp provided. Connect to rigid tubing with double compression fitting. |
Scale |
Lithograph printed on aluminum. Clear epoxy coated. |
Pressure Rating |
To 100 PSI (maximum) with compression fitting. To 50 PSI with tubing clamp. |
Temperature |
130°F |
Scale length |
2" |
Accuracy |
±4% of full scale. |
"O" Rings |
Buna-N; optional materials available. |
Color |
Clear. Knob and assembly key dyed black. |
|
|
|
|
|
Series MMA MINI-MASTER Models and Ranges |
Range
SCFH Air |
Ordering
Number |
Range
LPM Air |
Ordering
Number |
Range GPH
water |
Ordering
Number |
.5-2.5
.5-5
1-10
2-20
5-50
10-100
20-200
30-300
|
3
4
5
6
7
8
9
10
|
.2-1.2
.25-2.5
.5-5
1-10
2.5-25
5-50
10-100
15-150
|
20
21
22
23
24
25
26
27
|
.5-8
1-16
4-40
5-60
|
30
31
32
33
|
CC/Min. Water |
5-50
10-120
20-200
50-500
|
35
36
37
38
|
LPM Water |
.1-1.1
.25-2.5
.3-3.5 |
40
41
42 |
|
|
|
|
MINI-MASTER® Ranges-Series MMF |
Model MMF - 1 ½" Scale |
Range SCFH Air |
Ordering Number |
.1-1
.2-2
1-10
5-50
10-100 |
1
2
10
50
100 |
NOTE: For OEM quantity applications, special ranges and scales also available. |
|
|
|
|
How To Order: |
Designate the model by the letter MMA. Specify the range by adding the ordering number after a dash following the letters, i.e. MMA-8 designates a 10-100 SCFH air range. |
|
MODEL MMF |
Molded entirely from SAN. To indicate or manually control small volume air or non-corrosive gas flow from .1 to 100 SCFH. |
|
SPECIFICATIONS |
Meter Body, Bezel, Tube, Valve and Knob
|
Styrene-acrylonitrile. |
Floats |
Stainless Steel, Black Glass and Nylon |
Connections |
Molded with body, ¼" O.D. For push-on rubber or plastic tubing, or connect to metal or rigid plastic tubing with compression fittings. |
Scale |
Lithograph printed on aluminum. Clear epoxy coated. |
Pressure Rating |
To 50 PSI maximum. (Valve Model leak-tight below 10 PSI). |
Temperature Rating |
To 125°F maximum. |
Scale length |
1 ½" |
Accuracy |
±10% of Full Scale; better accuracy between 10% and 90% of Full Scale. |
|
OPTIONS |
CODE |
Metering Valve and Knob
|
Molded Polyurethane |
PV |
Top Mounted Valve
with Screwdriver
Adjustment
|
Molded Polyurethane
(for vacuum service only) |
TMV |
How To Order:
1. Designate series by letters MMF. 2. Specify range by adding ordering number as a suffix. Example: MMF-50. 3. To order with valves, add suffix -PV for front polyurethane or -TMV for top mounted valve (for vacuum service). Example: MMF-50-PV. |
|
Molded assembly key permits field assembly or disassembly of MMA flowmeter
|
MMA tubing connections secured by clamp. "Standup" mounting clip shown
|
|
|
|
|
OEM version MMA with flat front surfaces where no valve is required
|
Spring retainers on connection tubes secure panel mounted MMA. Compression union, P/N A-327 shown
|
|
|
|
|
|
|
Previous Page |
|
|
|
|